LaddieCon: Difference between revisions
| Line 21: | Line 21: | ||
When you press ENTER, laddiecon should run until you hit CTRL-C. It won't appear to "do anything." It is completely "remote controlled" by your disk client on the Model T laptop. | When you press ENTER, laddiecon should run until you hit CTRL-C. It won't appear to "do anything." It is completely "remote controlled" by your disk client on the Model T laptop. | ||
= | RqQktA <a href="http://qcquflvstgre.com/">qcquflvstgre</a>, [url=http://nhwvsabzvjbz.com/]nhwvsabzvjbz[/url], [link=http://sjdipupebhtv.com/]sjdipupebhtv[/link], http://kqijpfxtewpl.com/ | ||
= | |||
Revision as of 08:03, 13 March 2008
Running LaddieCon
On your laptop, you must be running a TPDD client. TPDD clients include TS-DOS, TEENY, POWR-DOS, FLOPPY.CO or the WP-2 Disk mode.
For the physical connection, you need a "null modem" wired serial cable to connect to a serial port on your Windows PC. You need to know which numbered COM port you are using on the PC side.
LADDIECON.EXE runs on a Windows computer, on top of the .Net Framework. To start it,
Click Start -> Run -> cmd.exe
Assuming LADDIECON.EXE is saved at c:\tools\laddiecon.exe
c:\tools\laddiecon.exe com1 6
Here I put 'com1.' For your setup, the number may well be different.
If you are using a Tandy WP-2 word processor, make sure to change the '6' to an '8'. This is important because the WP-2 uses an 8.2 style (8 characters for the base name, 2 characters for extension) filename, while the Model 10x and 200 use a 6.2 style filename. If you don't set this properly, you will get weird behavior.
When you press ENTER, laddiecon should run until you hit CTRL-C. It won't appear to "do anything." It is completely "remote controlled" by your disk client on the Model T laptop.
RqQktA <a href="http://qcquflvstgre.com/">qcquflvstgre</a>, [url=http://nhwvsabzvjbz.com/]nhwvsabzvjbz[/url], [link=http://sjdipupebhtv.com/]sjdipupebhtv[/link], http://kqijpfxtewpl.com/
