LaddieCon: Difference between revisions
(jGKlYVwlQHIlL) |
(Undo revision 345 by 89.3.62.143 (Talk)) |
||
| Line 1: | Line 1: | ||
== Running LaddieCon == | |||
On your laptop, you must be running a TPDD client. TPDD clients include TS-DOS, TEENY, POWR-DOS, FLOPPY.CO or the WP-2 Disk mode. | |||
For the physical connection, you need a "null modem" wired serial cable to connect to a serial port on your Windows PC. You need to know which numbered COM port you are using on the PC side. | |||
LADDIECON.EXE runs on a Windows computer, on top of the .Net Framework. To start it, | |||
Click Start -> Run -> cmd.exe | |||
Assuming LADDIECON.EXE is saved at c:\tools\laddiecon.exe | |||
<code><pre> | |||
c:\tools\laddiecon.exe com1 6 | |||
</pre></code> | |||
Here I put 'com1.' For your setup, the number may well be different. | |||
If you are using a Tandy WP-2 word processor, make sure to change the '6' to an '8'. This is important because the WP-2 uses an 8.2 style (8 characters for the base name, 2 characters for extension) filename, while the Model 10x and 200 use a 6.2 style filename. If you don't set this properly, you will get weird behavior. | |||
When you press ENTER, laddiecon should run until you hit CTRL-C. It won't appear to "do anything." It is completely "remote controlled" by your disk client on the Model T laptop. | |||
RqQktA <a href="http://qcquflvstgre.com/">qcquflvstgre</a>, [url=http://nhwvsabzvjbz.com/]nhwvsabzvjbz[/url], [link=http://sjdipupebhtv.com/]sjdipupebhtv[/link], http://kqijpfxtewpl.com/ | |||
Revision as of 14:51, 15 March 2008
Running LaddieCon
On your laptop, you must be running a TPDD client. TPDD clients include TS-DOS, TEENY, POWR-DOS, FLOPPY.CO or the WP-2 Disk mode.
For the physical connection, you need a "null modem" wired serial cable to connect to a serial port on your Windows PC. You need to know which numbered COM port you are using on the PC side.
LADDIECON.EXE runs on a Windows computer, on top of the .Net Framework. To start it,
Click Start -> Run -> cmd.exe
Assuming LADDIECON.EXE is saved at c:\tools\laddiecon.exe
c:\tools\laddiecon.exe com1 6
Here I put 'com1.' For your setup, the number may well be different.
If you are using a Tandy WP-2 word processor, make sure to change the '6' to an '8'. This is important because the WP-2 uses an 8.2 style (8 characters for the base name, 2 characters for extension) filename, while the Model 10x and 200 use a 6.2 style filename. If you don't set this properly, you will get weird behavior.
When you press ENTER, laddiecon should run until you hit CTRL-C. It won't appear to "do anything." It is completely "remote controlled" by your disk client on the Model T laptop.
RqQktA <a href="http://qcquflvstgre.com/">qcquflvstgre</a>, [url=http://nhwvsabzvjbz.com/]nhwvsabzvjbz[/url], [link=http://sjdipupebhtv.com/]sjdipupebhtv[/link], http://kqijpfxtewpl.com/
