DLPilot is designed to not require any documentation of it's own. Rather, it is for the most part a "slave" to whatever disk client you choose.
Compatible disk clients
- WP-2 Disk client
- Booster Pak (TS-DOS)
TS-DOS on a Mombo, Rex, or Remem is an excellent solution.
If you don't have a ROM solution, TEENY is the sensible alternative.
To plug your Palm to Model T, you need an adapter that bridges the 9-pin female adapter on your Palm cradle or cable to the 25-pin female port on your Model T. That means your adapter should be 25-pin male to 9-pin male, wired straight-through.
Note: the connection *must* be "straight through." DO NOT use a crossover cable like the Club100 "Complink" cable. Your Palm cradle is wired like a modem (DCE) not a terminal (DTE). The Complink cable is designed for connecting a Model T to another terminal (your PC). So, it is inappropriate for this purpose.
You may need an adapter AND a gender changer depending on what adapters you have laying around.
Install dlp.prc by whatever means you normally install Palm applications. Then look in your applications and launch the icon that looks like a Model 100.
Click the "ON" button. This turns on the serial port power on your Palm. It won't work if you don't click the ON button. Yeah, yeah, but sorry, I find this amusing and am unlikely to change it.
At this point, you should be able to completely remote control DLPilot from your Model T. You can save files to DLPilot and load them back to your laptop by following the TS-DOS documentation.
Viewing .DO files on your Palm
So, you've transferred a .DO file to your Palm and you want to look at it or edit it on the Palm. You can use SiEd from the Files section of the DLPilot Yahoo group.
DO files are converted to/form PalmDOC format on the fly by DLPilot while using your disk client. Any document reader software that supports the PalmDOC format (which should be all of them) can view the files.