Description of Machine Code File Handling Routines: Difference between revisions

From Bitchin100 DocGarden
Jump to navigationJump to search
No edit summary
(Undo revision 1582 by Jhoger (Talk))
Line 1: Line 1:
== Saving a machine code program into a RAM file ==
Boy that ralely helps me the heck out.
 
In this chapter, the method to save machine code program that resides in memory into RAM file as a ".CO" file is described. In fact, the object to be saved needs not necessarily machine code program. It can be binary data. The routines described later in this chapter saved the contents of specified portion of memory exactly as they are, just appending some control information.
 
The control information consists of three words: load address, length, and execution address. The contents of the file is always loaded back to the location where the contents (machine code program) were located when saved. The load address in the file contains the location. Note that this is NOT the address of the file itself.
 
=== Procedure to save machine code program ===
 
To save machine code program in memory as a ".CO" file, follow the steps below. Address of individual routines used in this chapter will be described later in this document.
 
1. Set up file name,
 
Set up file name in FILNAM. This is the same step used to open an ASCII file
except the extnsion should be "CO" in case of machine code program save. Body
of file anme (i.e. string that precedes the extension) should be 6 characters
long, space filled to the extension.
 
:<nowiki>[FILNAM] <= 1st character of file name</nowiki>
:.
:.
:.
:<nowiki>[FILNAM+5] <= 6th character of file name</nowiki>
:<nowiki>[FILNAM+6] <= "C"</nowiki>
:<nowiki>[FILNAM+7] <= "O"</nowiki>
:<nowiki>[FILNAM+8] <= " "</nowiki>
 
2. Set up parameters
 
Then set address of machine code program, its length and execution address.
 
:<nowiki>[BINADR] <= Start address of binary data</nowiki>
:<nowiki>[BINLEN] <= Length of binary data</nowiki>
:<nowiki>[BINEXE] <= Execution start address; 0 if not executable at IPL</nowiki>
 
3. Fix up directory structure.
 
Refer to "Description of ROM routines in PC_8201 for detail of LNKFIL routine.
 
<pre>
CALL LNKFIL ; Fix up directory structure
</pre>
 
4. Search for the file of the same name.
 
Search directory for the file that has the same name as one in that we want to
save the machine code program. If it exists, delete it. Obviously here you can
abort without saving new one, instead of deleting old one.
 
<pre>
CALL SRCCOM ; Search directory for FILNAM
CNZ KILCOM ; Kill old one if exist.
</pre>
 
5. Search directory for empty (free) slot.
 
To register the file, make sure there's free slot in directory and remember the
location of the slot. If not free slot is available, abort saving.
 
<pre>
CALL SCNEMP ; Search for empty slot.
; (save address)
</pre>
 
6. Allocate room in RAM file.
 
Allocate room in RAM file for machine code program and control information
(location, length, and execution address of machine code program). The length
of the control information is 6 bytes long (i.e.: 3 words). MAKHOL is the
routine to allocate room in [BC] length at [HL]. Here [VARTAB] tells the
location where the room is to be allocated.
 
<pre>
[HL] <= [VARTAB]
[BC] <= [BINLEN] + 6
CALL MAKHOL ; Allocate room
JC OMERR ; Error if out of memory
</pre>
 
7. Copy control information
 
Copy control information to the top of the room allocated in above step.
 
8. Copy machine code program
 
Copy machine code program into the rest of the room.
 
<pre>
[HL] <= [BINADR]
[DE] <= (Top address of the room) + 6
; Location in RAM file where
; the program is saved.
[BC] <= [BINLEN] ; Length of the program.
CALL LDIRSB ; Do block transfer.
</pre>
 
9. Reset BINTAB
 
<pre>
Special magic???
; actually, BINTAB must be preserved across call to MAKHOL
; because MAKHOL isn't smart enough to leave it alone
; when opening a hole in CO file region.
</pre>
 
10. Put file name into directory
 
<pre>
[HL] <= address of directory slot gained by SCNEMP
[DE] <= address of room in RAM file. One used in MAKHOL call.
[A] <= $AC (CO file directory flags byte)
CALL SETNAM
</pre>
 
11. Fix up the directory structure
 
<pre>
CALL LNKFIL ; gratuitous since appending to final region...
</pre>
 
=== Sample program ===
 
<pre>
; Save machine code program in memory into RAM file.
 
LXI H,0 ; Remember current SP for ERRJMP
DAD SP
SHLD MYSTACK
LXI H,ERROR
SHLD ERRJMP ; Active error trap
 
LXI H,MYFILE
LXI D,FILNAM
LXI B,6
CALL LDIRSB ; Copy filename to FILNAM
LXI M,FILNAM+6 ; Extension
MVI M,'C'
INX H
MVI M,'O'
INX H
MVI M,' '
 
LXI H,MYBIPA ; Format, copy in hdr
LXI D,BINADR
LXI B,6
CALL LDIRSB
 
CALL LNKFIL ; Fixup directory entry start addresses
 
CALL SRCCOM ; Search directory for a file
CNZ KILCOM ; Delete if exists
 
CALL SCNEMP ; Find an empty directory slot
PUSH H ; Save the address
 
LHLD BINTAB ; Save current BINTAB since MAKHOL damages it
PUSH H
 
LXI B,6
LHLD BINLEN
PUSH H ; Save BINLEN (without header) for future use
 
DAD B ; Add 6 bytes for header to HL
 
MOV E,H
MOV D,L ; Copy HL to DE but swap bytes??? Looks like bug...
 
LHLD VARTAB ; Where file is created/
SHLD TEMP ; Length saved for future use
CNC MAKHOL ; Make room for header and program
JC OMERR ; Cleanup if out of memory
 
XCHG
LXI H,BINADR
LXI B,6
CALL LDIRSB ; Copy header bytes into file
 
LHLD BINADR ; Point to source data
POP B ; Recover source length
CALL LDIRSB ; Copy in the program
 
POP H ; Restore BINTAB
SHLD BINTAB
 
POP H ; Recover dir slot pointer
MVI A,$A0 ; Set type to CO
XCHG
LHLD TEMP ; HL <= start address of file
XCHG
CALL SETNAM ; Fill in dir entry
 
CALL LNKFIL ; Fix up directory file start pointers
 
RETURN: LXI H,0 ; Remove error trap
SHLD ERRTRP
RET
 
ERROR: LHLD MYSTACK
SPHL ; drop BASIC junk from stack
; put error handling code here
JMP RETURN
 
OMERR: ; Put OM error handler here
JMP RETURN
 
MYFILE: .DB "SAMPLE"
 
MYBIPA: .DW $A000 ; Start address
.DW $0800 ; Length
.DW $A000 ; Entry address
 
MYSTACK: .DB 2
 
TEMP: .DB 2
 
.END
</pre>
 
[[Category:Model T Developer Reference]]

Revision as of 20:11, 6 July 2011

Boy that ralely helps me the heck out.