Difference between revisions of "MTHD"

From Bitchin100 DocGarden
Jump to: navigation, search
 
Line 1: Line 1:
 
This project it still under development.
 
This project it still under development.
  
The basic idea for this project is to add a harddrive via the [[System bus]] on the 100/102/200
+
The basic idea for this project is to add a hard drive via the [[System bus]] on the 100/102/200
  
The circut is based on a 8255 which controls the harddrive data and control signals.
+
The circuit is based on a 8255 which controls the hard drive data and control signals.
  
A 74573 is used to split the ADDRESS and DATA singnals and a 138 is used for IO mapping
+
A 74573 is used to split the ADDRESS and DATA signals and a 138 is used for IO mapping
  
 
The 8255 is split into 3 x 8bit ports, one is used for address, CS, RD, WR and RST. The other two port are used for the 16 data bus.  
 
The 8255 is split into 3 x 8bit ports, one is used for address, CS, RD, WR and RST. The other two port are used for the 16 data bus.  

Latest revision as of 16:56, 17 December 2009

This project it still under development.

The basic idea for this project is to add a hard drive via the System bus on the 100/102/200

The circuit is based on a 8255 which controls the hard drive data and control signals.

A 74573 is used to split the ADDRESS and DATA signals and a 138 is used for IO mapping

The 8255 is split into 3 x 8bit ports, one is used for address, CS, RD, WR and RST. The other two port are used for the 16 data bus.

Mthdv11.jpg