REX Release 4.9
- Model 100 and Tandy 102 with either REX or REX2
- Tandy 200 with REX.
- NEC PC-8201 or PC-8300 with REX3
Latest; PC-8300 support has been debugged, and there is a minor hardware change required. if your system is unstable, this fix should be applied. If it is stable then no problem. It appears that REX may be incompatible with PC-8300. My system works, but a small number of users report problems. Installation in a PC-8300 may or may not work.
Please note that ROM Replacement mode does not work on PC-8300 since it has a very different ROM structure.
- Y2K Fix - REX now automatically fixes the year displayed in MENU.
- PC-8201 support (including TAB key in addition to SHIFT-F5 to bank-switch, like T200)
- Multi-bank support - see description below
- Quick Menu features - see description below
- REX status indicator in MENU - the active Option ROM (for each bank) is indicated in the display
REX Functionality Overview
REX remains similar to release 4.8, but several major new capabilities have been added. The differences are outlined below.
Quick Menu Features
For commonly used functions, now some shortcut keys are available in MENU. This avoids the need to start REXMGR to perform simple operations like ROM switching and backing up your RAM.
Summary of commands:
- <CNTL-O>: Switch Option ROM - REX will display available Option ROMs, and the user can use arrow keys to move the cursor to the desired selection. <ENTER> to activate the new selection and start that ROM. <ESC> to exit. The Active Option ROM is indicated with a *.
- <CNTL-B>: Back up RAM - REX will prompt the user to confirm, and if confirmed will copy RAM to the active RAM image, performing a backup.
- <CNTL-R>: Restore RAM - REX will prompt the user to confirm, and if confirmed will copy the active RAM image to RAM, performing a restore.
- <CNTL-X>: Hooks removal - REX will prompt the user to confirm, and if confirmed will remove all hooks relating to REXMGR from the laptop operating system, effectively disabling REX. REXMGR remains in the MENU, so REX can be easily reinstalled. Also, the Active Option ROM is accessible using the usual ROM start procedures. This feature is useful when it is desired to run the Option ROM without REX active.
Unlike Model 100 and Tandy 102, multi-bank machines (PC-8201, PC-8300, T200) have an advantage in that the user has 3 distinct memory spaces to work with. Prior to release 4.9, all of those banks would have the same Option ROM active. In Release 4.9, multi-bank machines now may access unique active RAM images and active OPTION ROM images on a per-bank basis. For example, TS-DOS, UR-2 and R2C can be assigned to each bank, and each bank can have an associated RAM image. This means the user can simply TAB between spaces and quickly use different Option ROMs, and each RAM space can be backed up separately.
In REX Manager, images are marked with '*' next to the name when that image is ACTIVE in the current BANK. Images that are ACTIVE in OTHER BANKS are marked with '#'. Pressing B or b in REX Manager will indicate the BANK associated with an image, as well as the block number the image occupies in REX flash memory.
REX Release 4.9 supports the M100 4-bank 128kByte RAM Module, but only the first 3 RAM banks are supported.
Prior to Release 4.9, users wanting a fix for Y2K would have needed to make use of Main ROM Replacement via REX. This requires a hardware modification. Now, a Y2K patch is automatically applied when in MENU.
== Upgrading REX All upgrades to REX software are `clean sweep` upgrades, meaning you must save off all important stored RAM images to a TPDD device. After the upgrade, you can re-load your important RAM and OPTROM images into REX. The FLASH memory in REX is completely wiped.
Please see the section below for specific software release bundles.
What you need
- for M100 or T102: RF149.CO, RXF149.BR, TSD100.BX
- for T200: RF249.CO, RXF249.BR, TSD200.BX
- for PC-8201 or PC-8300: RFN49.CO, RXFN49.BR, TSDNEC.BX
- your favorite TPDD device connected to the laptop
Place the files in the root directory of your TPDD device for loading.
In order to make a "clean sweep" and make sure that no issues with older software, for the initial installation of 4.9 we take the approach of wiping the old directory, and all the flash contents (from block 6-31; the user space) and initialize things to default.
A note about Rom Replacement - if you are using this feature then you know that your main OS roms are stored in block 2-5. Those blocks are not erased, and they stay in place and operational the whole time. My three test machines are all running with REX based main roms.
So then, the first thing to do is for you to 'Save' all your existing RAM and OPTROM images (the ones that you both want to keep and are not already stored on a PC somewhere) out of REX and onto your favorite TPDD device. Please go through your saved images, decide what you want to save and use again, and get them out of REX. After we install R4.9, all those images will be wiped. You will have to reload anything you need.
Load the upgrader tool: Load into RAM the RFx49.CO file using the TPDD device. You will need to CLEAR0,55000 to run the program. But, don't run it yet.
Remove REX software from the laptop. This is an easy step - just go into REXMGR and press F7 (or SHIFT-F4 in PC-8201/8300)to DEINstall REX software. You should find yourself at MENU with RFx49.CO in the directory of the laptop.
Issue the BASIC command CLEAR0,55000. Exit BASIC and run RFx49.CO from Menu. RFx49.CO will do the necessary steps of erasing blocks, loading the REX software, copying it to backup block 1, and then loading TS-DOS into block 8.
Once RFx49.CO completes, you should be able to start REXMGR. Power cycle the laptop. Cold restart the machine to clean out any funny memory stuff. Enter BASIC and type either CALL63012 (M100/T102) CALL61167,2 (T200) EXEC62394 (PC-8201/8300)
Voila! You should see REXMGR in the MENU, and you should see the fancy new OPTROM indicator in the top right corner. You are now running release 4.9!!!!
REX Release 4.9 Upgrade Packages
The following files may be downloaded and used to upgrade your REX from an older release to R4.9 revision 134.
Revision 162 is a bugfix release. Note CNTL-X replaces CNTL-H.
|Status||Release||Model||Description||File||Revision||Submitter / Date|
|Beta||4.9||M100/T102||REX Release 4.9 Upgrade Package||R49_M100T102_162_upgrade||162|
|Beta||4.9||T200||REX Release 4.9 Upgrade Package for R4.8 and prior||R49_T200_134_upgrade48||134||Sadolph (talk) 08:03, 25 January 2015 (PST)|
REX Release 4.9 Source Code
The following files are ZIP files containing the source code for REX Release 4.9 by Revision.
|Status||Source Files||Revision||Submitter / Date|
|Beta||REX source code Revision 134||134||Sadolph (talk) 18:29, 21 February 2015 (PST)|
|Beta||REX source code Revision 117||117||Sadolph (talk) 20:14, 11 January 2015 (PST)|
|support files||134||Sadolph (talk) 14:28, 26 February 2015 (PST)|
About Main ROM Management
Please see the main REX wiki page for a description of this feature - how to prepare a ROM image, how to modify the hardware, and how to load REX with images.
This feature is not supported in PC-8300.
Rel. 4.9 Trouble Reports
|Status||Model(s)||Description||Impact||Work Around||User/ Date|
|resolved||M102||a problem occured upgrading from 4.8 to 4.9. unknown fault at this time.--- problem found. TSDOS was corrupted.||Medium||resolved - user reloaded TS-DOS using REXMGR.||Sadolph (talk) 12:30, 1 February 2015 (PST)|
|resolved in rev 119||T200||there was a minor issue in revision 117 relating to F1 BANK switching. Using F1 rather than TAB effectively uninstalled REXMGR.||Low||Restart REXMGR by power cycling and CALL61167,2. This is resolved in the next revision.||Sadolph (talk) 06:23, 24 January 2015 (PST)|
|believed resolved in 134||T200/PC-8201/PC-8300||periodically, REX software is not removed/reinstalled on bank switch. This disables REX in the new bank.||Low||Bank switch back to original bank and run REXMGR to reinstall.||Sadolph (talk) 08:02, 25 January 2015 (PST)|
|resolved||PC-8300||An early PC-8300 install was defective for unknown reasons. Update - they unit was DOA, and it appears to have been a poor solder joint. Resoldering the FLASH and the CPLD has apparently resolved the problem.||High||None at this time.||Sadolph (talk) 15:48, 10 February 2015 (PST)|
|Status||Description||Requester / Date|
|under consideration||is there some way to modify all the bank settings within REXMGR without having to exit, change bank, and re-enter REXMGR? Cool idea, hmmm.||Sadolph (talk) 15:56, 1 February 2015 (PST)|
|under consideration||Support for so called Paired Switching, where a RAM image is swapped and an OPTROM image is switched in the same step.||Sadolph 05:17, 15 August 2009 (PDT)|
|unlikely||Support for TPDD-2, for drive 1: (0: is supported).||Sadolph 04:36, 19 April 2009 (PDT)|
|in planning||Flash disk for file storage||Sadolph (talk) 05:09, 12 January 2015 (PST)|
nb: to put a username+datestamp just type 4 tildes ~~~~