Repairing Problem Keys: Difference between revisions
From Bitchin100 DocGarden
Jump to navigationJump to search
(New page: From Wee-Meng Lee: Unresponsive keys can be caused by some mild corrosion or dirt in the keys. I get it all the time and being in Singapore it takes too much trouble to send a key to me f...) |
No edit summary |
||
| Line 1: | Line 1: | ||
From Wee-Meng Lee: | '''From Wee-Meng Lee:''' | ||
Unresponsive keys can be caused by | Unresponsive keys can be caused by mild corrosion or dirt in the keys. | ||
I get it all the time | I get it all the time. Being in Singapore it takes too much trouble to send a key to me from Club100 in the U.S. . | ||
Try taking the key apart and cleaning the copper contacts first. | Try taking the key apart and cleaning the copper contacts first. If this repair works, you won't need to open up the M100 case or unsolder the keycap. | ||
'''Steps:''' | |||
* Pull out the key cap, by "levering" it out with two teaspoons. | * Pull out the key cap, by "levering" it out with two teaspoons. | ||
* Use a | * Use a jeweler's flat screw driver and pry open the latches at the sides to remove the top. | ||
* Remove the inverted rubber cup. | * Remove the inverted rubber cup. | ||
* Check that there | * Check that there is still some black carbon attached to it; if not, you can try sticking some rolled up aluminum foil in it and in the mean time ask Rick for a key. | ||
* Clean the copper contacts at the bottom of the key by using the eraser at the end of a pencil and rubbing gently until it's shiny. | * Clean the copper contacts at the bottom of the key by using the eraser at the end of a pencil and rubbing gently until it's shiny. | ||
* Put back the rubber cup, turn on the unit and press the cup down. | * Put back the rubber cup, turn on the unit and press the cup down. With any luck, your key will work again. | ||
* Reassemble the rest of the key. | * Reassemble the rest of the key. | ||
Revision as of 08:31, 5 November 2008
From Wee-Meng Lee:
Unresponsive keys can be caused by mild corrosion or dirt in the keys. I get it all the time. Being in Singapore it takes too much trouble to send a key to me from Club100 in the U.S. .
Try taking the key apart and cleaning the copper contacts first. If this repair works, you won't need to open up the M100 case or unsolder the keycap.
Steps:
- Pull out the key cap, by "levering" it out with two teaspoons.
- Use a jeweler's flat screw driver and pry open the latches at the sides to remove the top.
- Remove the inverted rubber cup.
- Check that there is still some black carbon attached to it; if not, you can try sticking some rolled up aluminum foil in it and in the mean time ask Rick for a key.
- Clean the copper contacts at the bottom of the key by using the eraser at the end of a pencil and rubbing gently until it's shiny.
- Put back the rubber cup, turn on the unit and press the cup down. With any luck, your key will work again.
- Reassemble the rest of the key.
