Bitchin100 DocGarden - User contributions [en]

M100 CP/M

2021-01-28T00:22:33Z

Philip.avery: /* News & Updates */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= News & Updates =

* 28-Jan-21 ---- Bug fixed in CPMUPD.CO to prevent possible hanging on completion. Mandatory to use this version (2.3) for REXCPM V2.

* 01-Jul-20 ---- M100 CP/M released.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REXCPM manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>2.3</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 0,60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

''How much free memory in M100 CP/M?'' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

'''''

'''''Philip Avery'''''

[[Category:Model T Software]]

M100 CP/M

2021-01-28T00:18:58Z

Philip.avery: /* News & Updates */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= News & Updates =

28-Jan-21 ---- Bug fixed in CPMUPD.CO to prevent possible hanging on completion. Mandatory to use this version (2.3) for REXCPM V2.

01-Jul-20 ---- M100 CP/M released.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REXCPM manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>2.3</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 0,60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

''How much free memory in M100 CP/M?'' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

'''''

'''''Philip Avery'''''

[[Category:Model T Software]]

M100 CP/M

2021-01-28T00:13:30Z

Philip.avery: /* Installation and Set Up */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= News & Updates =

28-Jan-21 * Bug fixed in CPMUPD.CO to prevent possible hanging on completion. Mandatory to use this version (2.3) for REXCPM V2.

1-Jul-20 * M100 CP/M released.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REXCPM manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>2.3</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 0,60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

''How much free memory in M100 CP/M?'' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

'''''

'''''Philip Avery'''''

[[Category:Model T Software]]

File:CPMUPD.CO

2021-01-28T00:10:55Z

Philip.avery: Philip.avery uploaded a new version of "File:CPMUPD.CO"

Installer/updater

M100 CP/M

2021-01-27T21:00:46Z

Philip.avery: /* News & Updates */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= News & Updates =

28-Jan-21 * Bug fixed in CPMUPD.CO to prevent possible hanging on completion. Mandatory to use this version (2.3) for REXCPM V2.

1-Jul-20 * M100 CP/M released.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REXCPM manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 0,60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

''How much free memory in M100 CP/M?'' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

'''''

'''''Philip Avery'''''

[[Category:Model T Software]]

M100 CP/M

2021-01-27T20:56:59Z

Philip.avery: /* News & Updates */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= News & Updates =

28-Jan-21 * Bug fixed in CPMUPD.CO to prevent possible hanging on completion.
Mandatory to use this version (2.3) for REXCPM V2.

1-Jul-20 M100 CP/M released.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REXCPM manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 0,60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

''How much free memory in M100 CP/M?'' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

'''''

'''''Philip Avery'''''

[[Category:Model T Software]]

M100 CP/M

2021-01-27T20:56:16Z

Philip.avery: /* Acknowledgements */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= News & Updates =

28-Jan-21 Bug fixed in CPMUPD.CO to prevent possible hanging on completion.
Mandatory to use this version (2.3) for REXCPM V2.

1-Jul-20 M100 CP/M released.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REXCPM manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 0,60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

''How much free memory in M100 CP/M?'' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

'''''

'''''Philip Avery'''''

[[Category:Model T Software]]

M100 CP/M

2021-01-27T20:55:56Z

Philip.avery: /* Headline text */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= News & Updates =

28-Jan-21 Bug fixed in CPMUPD.CO to prevent possible hanging on completion.
Mandatory to use this version (2.3) for REXCPM V2.

1-Jul-20 M100 CP/M released.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REXCPM manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 0,60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

''How much free memory in M100 CP/M?'' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

'''''

'''''Philip Avery'''''

[[Category:Model T Software]]

M100 CP/M

2021-01-27T20:55:37Z

Philip.avery: /* Headline text */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= News & Updates =

28-Jan-21 Bug fixed in CPMUPD.CO to prevent possible hanging on completion.
Mandatory to use this version (2.3) for REXCPM V2.

1-Jul-20 M100 CP/M released.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REXCPM manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 0,60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

''How much free memory in M100 CP/M?'' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

'''''
== Headline text ==
'''''Philip Avery'''''

[[Category:Model T Software]]

M100 CP/M

2021-01-27T20:55:19Z

Philip.avery: /* Acknowledgements */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= News & Updates =

28-Jan-21 Bug fixed in CPMUPD.CO to prevent possible hanging on completion.
Mandatory to use this version (2.3) for REXCPM V2.

1-Jul-20 M100 CP/M released.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REXCPM manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 0,60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

''How much free memory in M100 CP/M?'' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

'''''
== Headline text ==
Philip Avery'''''

[[Category:Model T Software]]

M100 CP/M

2021-01-27T20:54:53Z

Philip.avery: /* Acknowledgements */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= News & Updates =

28-Jan-21 Bug fixed in CPMUPD.CO to prevent possible hanging on completion.
Mandatory to use this version (2.3) for REXCPM V2.

1-Jul-20 M100 CP/M released.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REXCPM manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 0,60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

''How much free memory in M100 CP/M?'' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

'''''Philip Avery'''''

[[Category:Model T Software]]

M100 CP/M

2021-01-27T20:54:31Z

Philip.avery: /* Acknowledgements */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= News & Updates =

28-Jan-21 Bug fixed in CPMUPD.CO to prevent possible hanging on completion.
Mandatory to use this version (2.3) for REXCPM V2.

1-Jul-20 M100 CP/M released.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REXCPM manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 0,60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

''How much free memory in M100 CP/M?'' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

'''''Philip Avery''''''

[[Category:Model T Software]]

M100 CP/M

2021-01-27T20:53:39Z

Philip.avery: /* Acknowledgements */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= News & Updates =

28-Jan-21 Bug fixed in CPMUPD.CO to prevent possible hanging on completion.
Mandatory to use this version (2.3) for REXCPM V2.

1-Jul-20 M100 CP/M released.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REXCPM manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 0,60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

''How much free memory in M100 CP/M?'' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

'''Philip Avery'''

[[Category:Model T Software]]

M100 CP/M

2021-01-27T20:53:17Z

Philip.avery: /* Acknowledgements */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= News & Updates =

28-Jan-21 Bug fixed in CPMUPD.CO to prevent possible hanging on completion.
Mandatory to use this version (2.3) for REXCPM V2.

1-Jul-20 M100 CP/M released.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REXCPM manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 0,60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

''How much free memory in M100 CP/M?'' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

'''Philip Avery'''

[[Category:Model T Software]]

M100 CP/M

2021-01-27T20:52:54Z

Philip.avery: /* Acknowledgements */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= News & Updates =

28-Jan-21 Bug fixed in CPMUPD.CO to prevent possible hanging on completion.
Mandatory to use this version (2.3) for REXCPM V2.

1-Jul-20 M100 CP/M released.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REXCPM manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 0,60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

''How much free memory in M100 CP/M?'' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

"''Philip Avery''"

[[Category:Model T Software]]

M100 CP/M

2021-01-27T20:50:53Z

Philip.avery: /* Philip Avery */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= News & Updates =

28-Jan-21 Bug fixed in CPMUPD.CO to prevent possible hanging on completion.
Mandatory to use this version (2.3) for REXCPM V2.

1-Jul-20 M100 CP/M released.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REXCPM manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 0,60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

''How much free memory in M100 CP/M?'' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

''Philip Avery''

[[Category:Model T Software]]

M100 CP/M

2021-01-27T20:50:11Z

Philip.avery: /* News & Updates */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= News & Updates =

28-Jan-21 Bug fixed in CPMUPD.CO to prevent possible hanging on completion.
Mandatory to use this version (2.3) for REXCPM V2.

1-Jul-20 M100 CP/M released.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REXCPM manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 0,60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

''How much free memory in M100 CP/M?'' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

= ''Philip Avery'' =
''1-Jul-20''

[[Category:Model T Software]]

M100 CP/M

2021-01-27T20:45:18Z

Philip.avery: /* Installation and Set Up */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= News & Updates =

28-Jan-21

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REXCPM manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 0,60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

''How much free memory in M100 CP/M?'' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

= ''Philip Avery'' =
''1-Jul-20''

[[Category:Model T Software]]

M100 CP/M

2020-11-16T01:47:13Z

Philip.avery: /* Installation and Set Up */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REXCPM manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 0,60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

''How much free memory in M100 CP/M?'' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

= ''Philip Avery'' =
''1-Jul-20''

[[Category:Model T Software]]

M100 CP/M

2020-07-25T00:23:07Z

Philip.avery: /* Installation and Set Up */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REX manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 0,60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

''How much free memory in M100 CP/M?'' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

= ''Philip Avery'' =
''1-Jul-20''

[[Category:Model T Software]]

M100 CP/M

2020-06-30T23:32:47Z

Philip.avery: /* The right & wrong CP/M Application software */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REX manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

''How much free memory in M100 CP/M?'' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

= ''Philip Avery'' =
''1-Jul-20''

[[Category:Model T Software]]

M100 CP/M

2020-06-30T23:31:44Z

Philip.avery: /* The right & wrong CP/M Application software */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REX manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

'''''How much free memory in M100 CP/M?''''' Some applications may need this for configuring. BDOS starts at DE1Eh (56862)

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

= ''Philip Avery'' =
''1-Jul-20''

[[Category:Model T Software]]

M100 CP/M

2020-06-30T23:20:22Z

Philip.avery: /* Philip Avery */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REX manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

= ''Philip Avery'' =
''1-Jul-20''

[[Category:Model T Software]]

M100 CP/M

2020-06-30T23:19:14Z

Philip.avery:

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REX manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

= ''Philip Avery'' =
1-Jul-20

[[Category:Model T Software]]

M100 CP/M

2020-06-30T23:15:43Z

Philip.avery: /* Special M100 CP/M features */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REX manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may soon change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

[[Category:Model T Software]]

M100 CP/M

2020-06-30T23:14:36Z

Philip.avery: /* Importing & Exporting software */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REX manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation and Set Up).

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

[[Category:Model T Software]]

M100 CP/M

2020-06-30T23:13:58Z

Philip.avery: /* Importing & Exporting software */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REX manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see comment in Installation & Setup

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

[[Category:Model T Software]]

M100 CP/M

2020-06-30T23:13:10Z

Philip.avery: /* Importing & Exporting software */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REX manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary. (Note: if using USB-serial converter, see

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

[[Category:Model T Software]]

M100 CP/M

2020-06-30T23:10:54Z

Philip.avery: /* Installation and Set Up */

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REX manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter has "FTDI" chipset to avoid this error).

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary.

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

[[Category:Model T Software]]

M100 CP/M

2020-06-30T23:03:33Z

Philip.avery:

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REX manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 60000 from Basic. In Main Menu, execute CPMUPD.CO.

(Note: if using USB-serial converters. Whilst some cheap converters work fine for normal M100 transfers (ie less than 32KB), experience has shown failure can occur with larger CP/M files. If a "checksum error" is displayed during M100 CP/M install, the USB-serial converter is likely to be the problem. Ensure your converter is

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished. The RS-232 settings used are: 98N1D (19200 baud)

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary.

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= Initialising RS-232 =

When connecting a device to the RS-232 port (disregard if redirecting video to it), the port needs initialising. Longer term a Config utility or function key is the goal, but in the meantime the RS-232 port can be set to: 98N1D (19200) by:
- Press LABEL, then F3 until RS23 is displayed, press LABEL again. Now reselect your video mode of choice by: LABEL, pressing F3, LABEL again

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

[[Category:Model T Software]]

M100 CP/M

2020-06-13T04:44:57Z

Philip.avery:

[[Image:M100CPM.PNG]]

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= Status =

* M100 CP/M is currently in beta testing

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REX manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 60000 from Basic. In Main Menu, execute CPMUPD.CO.

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device. '''''News 13-Jun-20: Suggest holding off making this mod as may change for a Z80 compatible solution'''''

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished.

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary.

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

[[Category:Model T Software]]

M100 CP/M

2020-05-28T21:49:58Z

Philip.avery: /* Installation and Set Up */

[[Image:M100CPM.PNG]]

------------============= PAGE UNDER DEVELOPMENT!!!================
-------------

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= Status =

* M100 CP/M is currently in beta testing

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REX manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 60000 from Basic. In Main Menu, execute CPMUPD.CO.

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted altogether from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device.

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished.

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary.

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

[[Category:Model T Software]]

M100 CP/M

2020-05-28T21:47:39Z

Philip.avery:

[[Image:M100CPM.PNG]]

------------============= PAGE UNDER DEVELOPMENT!!!================
-------------

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= Status =

* M100 CP/M is currently in beta testing

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REX manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 60000 from Basic. In Main Menu, execute CPMUPD.CO.

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here are two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device.

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished.

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary.

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

[[Category:Model T Software]]

M100 CP/M

2020-05-28T21:45:01Z

Philip.avery:

[[Image:M100CPM.PNG]]

------------============= PAGE UNDER DEVELOPMENT!!!================
-------------

<big>'''What is M100 CP/M?'''</big>

M100 CP/M is an implementation of CP/M 2.2 that is tailored to the TRS-80 Model 100 & Tandy 102. Now able to run the predominant operating system of the 1970s & early 1980s means a huge library of programming languages, text adventures, utilities, etc, can now run on these computers. Here is a quick [https://obsolescence.wixsite.com/obsolescence/introduction-to-cpm look] into CP/M. M100 CP/M is free to download from [[#Installation and Set Up|Installation and Set Up]].

In order to run CP/M, these computers need two changes to hardware:
* RAM needs to be present in lower 32KB region
* Some form of memory to act as disk storage

[[REXCPM]] is the device that achieves this. Developed by long-standing M100 hardware specialist Steve Adolph, REXCPM is a plug 'n play Option ROM board that provides the lower 32KB, plus either 2MB or 4MB of RAM-disk.

This package of M100 CP/M & REXCPM makes these computers a venerable CP/M machine with their small footprint, enviable keyboard, super-fast RAM-disk, long battery life, etc, etc.

= Status =

* M100 CP/M is currently in beta testing

= Installation and Set Up =

Once your REXCPM board is installed & verified by running RXCMGR (REX manager) successfully, download these files:
<table border="1">
<tr><td>Model</td><td>Description</td><td>File</td><td>Revision</td></tr>
<tr><td>M100/T102</td><td>Installer/updater</td><td>[[Media:CPMUPD.CO|CPMUPD.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM.CO</td><td>[[Media:CPM.CO|CPM.CO]]</td><td>1</td></tr>
<tr><td>M100/T102</td><td>CPM for 2MB REXCPM</td><td>[[Media:Cpm210.bk|CPM210.BK]]</td><td>1</td></tr>
<tr><td></td><td> or </td><td></td><td></td></tr>
<tr><td>M100/T102</td><td>CPM for 4MB REXCPM</td><td>[[Media:Cpm410.bk|CPM410.BK]]</td><td>1</td></tr></table>

Move CPMUPD.CO & CPM.CO to your M100. Leave CPM210.BK (or CPM410.BK) on the emulated-TPDD.
Issue CLEAR 60000 from Basic. In Main Menu, execute CPMUPD.CO.

Enter the 'Install filename', either CPM210.BK or CPM410.BK. As you have no existing CP/M disk, press 'y' to confirm.

M100 CP/M will install, taking 5-lines of progress dots... (about 2min 35sec). On completion, you'll be returned to Main Menu. If there was a TPDD-error, the program will stop & display error message.

Re-activate RXCMGR by selecting it & F8. CP/M can be entered by two ways: selecting '''CPM.CO''' or by REXCPM hot-key ''''ctrl-c''''. In fact if you're only going to use the hot-key, CPM.CO can be deleted from Menu.

= Using CP/M =

To exit CP/M to M100 Main Menu, press F8.

There is only one 'disk drive' in M100 CP/M, the "A" drive. It is however nearly 2MB (or 4MB) in size.

CP/M commands can be in lower case, here's two common examples:

* dir - produces a Directory

* stat - shows free space on disk

Here is a [http://www.oocities.org/homeofoscarvermeulen/cpm/cpm_commands.html summary] of commands. Here is the full [http://www.cpm.z80.de/manuals/cpm22-m.pdf manual] for CP/M 2.2.

= Special M100 CP/M features =

'''SCREEN CONTROL'''

CP/M is designed for 80 x 24 screen size, thus the 40 x 8 of the M100 presents challenges. Some software wont recognise ctrl-s (or PAUSE key on M100) to stop scrolling. Zork adventure series is an example of this. So M100 CP/M can turn off scrolling until a key is pressed.

* F1 - toggles between Scroll Locked (Sc L) and 'Scroll Standard' (Sc S). Press LABEL to see this. In Locked mode, when the display is ready to scroll, the cursor will be at the right-hand bottom awaiting any key press. F1 can be pressed at anytime, however best to select it before starting the offending program.

Some software doesn't use the standard CP/M key-entry routines resulting in a cursor not displaying. Zork is also an example of this.

* F2 - toggles between 'Cursor Full-time (Cu F) and 'Cursor Standard' (Cu S). Press LABEL to see this. If a program doesn't show a cursor when at keyboard input, select 'Cursor Full-time'. F2 can be pressed anytime. The reason Cursor Standard is an option is so a flashing cursor isn't a distraction when the CPU is processing or doing graphics on the M100 LCD.

M100 CP/M can redirect video output to an external monitor giving full 80x24 display. Using this [[VT100]] device, an old CRT or LCD VGA monitor can be put to good use. There is also the option to redirect video through the Cassette or BCR ports ([[BCR TTL SERIAL HACK]]), thereby keeping the RS-232 port free for connecting to an emulated-TPDD or other serial device.

* F3 - toggles between M100 (M100 LCD 40x8), RS23 (RS-232 port) and CASS (Cassette/BCR port). LABEL has to be active to make a change. The change occurs when LABEL is extinguished.

= The right & wrong CP/M Application software =

'''The Right'''

The CP/M-era spanned several processors, so only 8080 CP/M software will run on M100 CP/M, not that for Z80 or 8086. Most early CP/M software was 8080 and is retrospectively referred to as CPM-80, as opposed to CPM-86. However Z80 software can also be classed as CPM-80.

Here is a good [http://www.retroarchive.org/cpm/index.html library] of software. (NB some maybe Z80 or 8086). Here is [http://planemo.org/retro/downloads/z100/software/cpm/ another]. (Should be good as it's for 8085).

Here is our list of [[M100 CP/M Application Software]].

'''The Wrong'''

Programs known not to run on M100 CP/M

- Turbo Pascal (requires Z80)
- VDE full-screen editor (requires Z80)

= Importing & Exporting software =

Once you have found some '''''Right''''' software, you need to '''import''' it into M100 CP/M.
* Have the files in the current directory on your emulated TPDD. Currently filenames must be 6.2 format (eg 'progra.co') as opposed to CP/M's 8.3 format (eg 'program.com'), so temporary renaming maybe necessary.

In CP/M, use the IMPORT command to copy from TPDD into CP/M, eg:

* '''import progra.co program.com''' (this imports 'progra.co' from TPDD and saves as 'program.com')

Other examples:

* '''import progra.co''' (imports & saves as 'progra.co')

* '''import progra.co .com''' (imports & saves as 'progra.com')

Exporting is the same, but ensure you're saving in 6.2 format. eg

* '''export program.com progra.co''' (this exports 'program.com' to TPDD and saves as 'progra.co')

(other variants work as for IMPORT)

IMPORT & EXPORT HELP

Entering the command "import" or "export" with no filename displays help text & examples.

= In case of Difficulty =

If the M100 hangs during CP/M, try the following in order, proceeding to the next step only if necessary:

- ctrl-c
- Reset. Will return to Menu. If a blank M100 Menu comes up, don't panic
- Turn power off/on. This should restore Menu
- If Menu is still blank, enter Basic and CALL 63012
- This should restore RXCMGR & you'll be able to restore your RAM image from a REX backup (assuming you've made one)

= Acknowledgements =

I would like to thank those who have contributed to the project:

'''Steve Adolph''' - for producing REXCPM hardware (which is a delight to program). For CASS/BCR video output, hi-speed Backup and technical support.

'''Kenneth Pettit''' - for VirtualT as this project would have remained a dream if not for VT.

'''Mike Stein''' - for alerting me to Geoff Graham's VT-100 Terminal project and for beta-testing.

[[Category:Model T Software]]

M100 CP/M Application Software

2020-05-28T04:53:05Z

Philip.avery:

[[Image:M100CPM.PNG]]

<big>'''
Here is known-good CP/M software for the M100 including that which is configured or patched to work on the M100. If you find more software, please make it known on the bitchin100.com discussion list & we'll include it here.

{| class="wikitable"
|'''.zip download'''||'''Name'''||''' Works on 40x8 '''||''' Works on 80x24 '''||'''Description & Notes'''
|-
||||||||
|-
|'''LANGUAGES'''||||||||
|-
|[https://www.bdsoft.com/dist/bdsc-all.zip BDS-C]||BDS-C C-language compiler||YES||YES||K&R C. Noted for its fast compile time. Further info [https://www.bdsoft.com/resources/bdsc.html here]
|-
|[[Media:Tiny3.zip|TINY]]||Tiny Basic||YES||YES||Tiny Basic from mid-1970s. All input must be in uppercase. Use BYE to exit. Includes Tic-Tac-Toe game. LOAD TAC
|-
||||||||
|-
|'''GAMES'''||||||||
|-
|[[Media:LADDER.zip|LADDER]]||LADDER||NO||YES||Classic Ladder game. Use 4&6 for left/right, space to jump. (8 for up?)
|-
|[[Media:Othello.zip|Othello]]||OTHELLO||NO||YES||Classic Othello / Reversi game
|-
||||||||
|-
|'''TEXT EDITORS'''||||||||
|-
|[[Media:VED40.zip|VEDIT40]]||VEDIT40||YES||NO||Full-screen text editor configured for M100 LCD - 40x8. Very similar to M100 TEXT. Thanks to Steve Adolph
|-
|[[Media:VED80.zip|VEDIT80]]||VEDIT80||NO||YES||Full-screen text editor configured for M100 VT-100 - 80x24. Very similar to M100 TEXT. Thanks to Steve Adolph
|-
|[[Media:VEDcust.zip|VEDIT customization info]]||-||-||-|| Customization info used to create VED40 and VED80
|-
|[[Media:VEDIT.zip|VEDIT distribution]]||-||-||-|| VEDIT distribution 1.32
|-
||||||||
|-}

M100 CP/M Application Software

2020-05-28T04:49:20Z

Philip.avery:

[[Image:M100CPM.PNG]]

<big>'''
Here is known-good CP/M software for the M100 including that which is configured or patched to work on the M100. If you find more software, please make it known on the bitchin100.com discussion list & we'll include it here.

{| class="wikitable"
|'''.zip download'''||'''Name'''||''' Works on 40x8 '''||''' Works on 80x24 '''||'''Description & Notes'''
|-
||||||||
|-
|'''LANGUAGES'''||||||||
|-
|[https://www.bdsoft.com/dist/bdsc-all.zip BDS-C]||BDS-C C-language compiler||YES||YES||K&R C. Noted for its fast compile time. Further info [https://www.bdsoft.com/resources/bdsc.html here]
|-
|[[Media:Tiny3.zip|TINY]]||Tiny Basic||YES||YES||Tiny Basic from mid 1970s. All input must be in uppercase. Use BYE to exit. Includes Tic-Tac-Toe game. LOAD TAC. RUN
|-
||||||||
|-
|'''GAMES'''||||||||
|-
|[[Media:LADDER.zip|LADDER]]||LADDER||NO||YES||Classic LADDER game. Use 4&6 for left/right, space to jump. (8 for up?)
|-
|[[Media:Othello.zip|Othello]]||OTHELLO||NO||YES||Classic Othello / Reversi game
|-
||||||||
|-
|'''TEXT EDITORS'''||||||||
|-
|[[Media:VED40.zip|VEDIT40]]||VEDIT40||YES||NO||Full-screen text editor configured for M100 LCD - 40x8. Very similar to M100 TEXT. Thanks to Steve Adolph
|-
|[[Media:VED80.zip|VEDIT80]]||VEDIT80||NO||YES||Full-screen text editor configured for M100 VT-100 - 80x24. Very similar to M100 TEXT. Thanks to Steve Adolph
|-
|[[Media:VEDcust.zip|VEDIT customization info]]||-||-||-|| Customization info used to create VED40 and VED80
|-
|[[Media:VEDIT.zip|VEDIT distribution]]||-||-||-|| VEDIT distribution 1.32
|-
||||||||
|-}

File:Tiny3.zip

2020-05-28T04:44:06Z

Philip.avery:

M100 CP/M Application Software

2020-05-28T04:43:36Z

Philip.avery:

[[Image:M100CPM.PNG]]

<big>'''
Here is known-good CP/M software for the M100 including that which is configured or patched to work on the M100. If you find more software, please make it known on the bitchin100.com discussion list & we'll include it here.

{| class="wikitable"
|'''.zip download'''||'''Name'''||''' Works on 40x8 '''||''' Works on 80x24 '''||'''Description & Notes'''
|-
||||||||
|-
|'''LANGUAGES'''||||||||
|-
|[https://www.bdsoft.com/dist/bdsc-all.zip BDS-C]||BDS-C C-language compiler||YES||YES||K&R C. Noted for its fast compile time. Further info [https://www.bdsoft.com/resources/bdsc.html here]
|-
||||||||
|-
|'''GAMES'''||||||||
|-
|[[Media:LADDER.zip|LADDER]]||LADDER||NO||YES||Classic LADDER game. Use 4&6 for left/right, space to jump. (8 for up?)
|-
|[[Media:Othello.zip|Othello]]||OTHELLO||NO||YES||Classic Othello / Reversi game
|-
||||||||
|-
|'''TEXT EDITORS'''||||||||
|-
|[[Media:VED40.zip|VEDIT40]]||VEDIT40||YES||NO||Full-screen text editor configured for M100 LCD - 40x8. Very similar to M100 TEXT. Thanks to Steve Adolph
|-
|[[Media:VED80.zip|VEDIT80]]||VEDIT80||NO||YES||Full-screen text editor configured for M100 VT-100 - 80x24. Very similar to M100 TEXT. Thanks to Steve Adolph
|-
|[[Media:VEDcust.zip|VEDIT customization info]]||-||-||-|| Customization info used to create VED40 and VED80
|-
|[[Media:VEDIT.zip|VEDIT distribution]]||-||-||-|| VEDIT distribution 1.32
|-
||||||||
|-}

File:VED40.zip

2020-05-26T21:35:30Z

Philip.avery: Philip.avery uploaded a new version of "File:VED40.zip"

M100 CP/M Application Software

2020-05-26T21:19:51Z

Philip.avery:

[[Image:M100CPM.PNG]]

<big>'''
Here is known-good CP/M software for the M100 including that which is configured or patched to work on the M100. If you find more software, please make it known on the bitchin100.com discussion list & we'll include it here.

{| class="wikitable"
|'''.zip download'''||'''Name'''||''' Works on 40x8 '''||''' Works on 80x24 '''||'''Description & Notes'''
|-
||||||||
|-
|'''LANGUAGES'''||||||||
|-
|[https://www.bdsoft.com/dist/bdsc-all.zip BDS-C]||BDS-C C-language compiler||YES||YES||K&R C. Noted for its fast compile time. Further info [https://www.bdsoft.com/resources/bdsc.html here]
|-
||||||||
|-
|'''GAMES'''||||||||
|-
|[[Media:LADDER.zip|LADDER]]||Ladder||NO||YES||Classic LADDER game. Use 4&6 for left/right, space to jump. (8 for up?)
|-
||||||||
|-
|'''TEXT EDITORS'''||||||||
|-
|[[Media:VED40.zip|VEDIT40]]||VEDIT40||YES||NO||Full-screen text editor configured for M100 LCD - 40x8. Very similar to M100 TEXT. Thanks to Steve Adolph
|-
|[[Media:VED80.zip|VEDIT80]]||VEDIT80||NO||YES||Full-screen text editor configured for M100 VT-100 - 80x24. Very similar to M100 TEXT. Thanks to Steve Adolph
|-
||||||||
|-}

File:VED80.zip

2020-05-26T21:19:08Z

Philip.avery: Philip.avery uploaded a new version of "File:VED80.zip"

File:VED80.zip

2020-05-26T21:10:17Z

Philip.avery:

M100 CP/M Application Software

2020-05-26T04:37:21Z

Philip.avery:

[[Image:M100CPM.PNG]]

<big>'''
Here is known-good CP/M software for the M100 including that which is configured or patched to work on the M100. If you find more software, please make it known on the bitchin100.com discussion list & we'll include it here.

{| class="wikitable"
|'''.zip download'''||'''Name'''||''' Works on 40x8 '''||''' Works on 80x24 '''||'''Description & Notes'''
|-
||||||||
|-
|'''LANGUAGES'''||||||||
|-
|[https://www.bdsoft.com/dist/bdsc-all.zip BDS-C]||BDS-C C-language compiler||YES||YES||K&R C. Noted for its fast compile time. Further info [https://www.bdsoft.com/resources/bdsc.html here]
|-
||||||||
|-
|'''GAMES'''||||||||
|-
|[[Media:LADDER.zip|LADDER]]||Ladder||NO||YES||Classic LADDER game. Use 4&6 for left/right, space to jump. (8 for up?)
|-
||||||||
|-
|'''TEXT EDITORS'''||||||||
|-
|[[Media:VED40.zip|VEDIT40]]||VEDIT40||YES||NO||Full-screen text editor configured for M100 LCD - 40x8. Very similar to M100 TEXT. Thanks to Steve Adolph. (Still in development)
|-
|[[Media:VED80.zip|VEDIT80]]||VEDIT80||NO||YES||Full-screen text editor configured for M100 VT-100 - 80x24. Very similar to M100 TEXT. Thanks to Steve Adolph. (Still in development)
|-
||||||||
|-}

M100 CP/M Application Software

2020-05-26T04:35:10Z

Philip.avery:

[[Image:M100CPM.PNG]]

<big>'''
Here is known-good CP/M software for the M100 including that which is configured or patched to work on the M100. If you find more software, please make it known on the bitchin100.com discussion list & we'll include it here.

{| class="wikitable"
|'''.zip download'''||'''Name'''||''' Works on 40x8 '''||''' Works on 80x24 '''||'''Description & Notes'''
|-
||||||||
|-
|'''LANGUAGES'''||||||||
|-
|[https://www.bdsoft.com/dist/bdsc-all.zip BDS-C]||BDS-C C-language compiler||YES||YES||K&R C. Noted for its fast compile time. Further info [https://www.bdsoft.com/resources/bdsc.html here]
|-
||||||||
|-
|'''GAMES'''||||||||
|-
|[[Media:LADDER.zip|LADDER]]||Ladder||NO||YES||Classic LADDER game. Use 4&6 for left/right, space to jump. (8 for up?)
|-
||||||||
|-
|'''TEXT EDITORS'''||||||||
|-
|[[Media:VED40.zip|VED40]]||VEDIT40||YES||NO||Full-screen text editor configured for M100 LCD - 40x8. Very similar to M100 TEXT. Thanks to Steve Adolph. (Still in development)
|-
|[[Media:VED80.zip|VED80]]||VEDIT80||NO||YES||Full-screen text editor configured for M100 VT-100 - 80x24. Very similar to M100 TEXT. Thanks to Steve Adolph. (Still in development)
|-
||||||||
|-}

M100 CP/M Application Software

2020-05-26T04:32:29Z

Philip.avery:

[[Image:M100CPM.PNG]]

<big>'''
Here is known-good CP/M software for the M100 including that which is configured or patched to work on the M100. If you find more software, please make it known on the bitchin100.com discussion list & we'll include it here.

{| class="wikitable"
|'''.zip download'''||'''Name'''||''' Works on 40x8 '''||''' Works on 80x24 '''||'''Description & Notes'''
|-
||||||||
|-
|'''LANGUAGES'''||||||||
|-
|[https://www.bdsoft.com/dist/bdsc-all.zip BDS-C]||BDS-C C-language compiler||YES||YES||K&R C. Noted for its fast compile time. Further info [https://www.bdsoft.com/resources/bdsc.html here]
|-
||||||||
|-
|'''GAMES'''||||||||
|-
|[[Media:LADDER.zip|LADDER]]||Ladder||NO||YES||Classic LADDER game. Use 4&6 for left/right, space to jump. (8 for up?)
|-
|'''TEXT EDITORS'''||||||||
|-
|[[Media:VED40.zip|VED40]]||VEDIT40||YES||NO||Full-screen text editor configured for M100 LCD - 40x8. Very similar to M100 TEXT. Thanks to Steve Adolph. (Still in development)
|-
|[[Media:VED80.zip|VED80]]||VEDIT80||NO||YES||Full-screen text editor configured for M100 VT-100 - 80x24. Very similar to M100 TEXT. Thanks to Steve Adolph. (Still in development)
|}

M100 CP/M Application Software

2020-05-26T04:27:31Z

Philip.avery:

File:VED40.zip

2020-05-26T04:25:37Z

Philip.avery:

M100 CP/M Application Software

2020-05-26T04:25:04Z

Philip.avery:

M100 CP/M Application Software

2020-05-26T04:18:47Z

Philip.avery:

File:LADDER.zip

2020-05-26T04:08:56Z

Philip.avery: