TBACK

Overview

TBACK is a program for 32-bit Windows which will rapidly back up the "state" (RAM contents) of your Model 100 or Tandy 102 to a PC.

Compatibility

Operating System

TBACK has been tested for software compatibility on

Windows 98SE	John Hogerhuis	Sometimes TBACK gets stuck if verbose (debug) mode is enabled (running in VirtualBox OSE on Linux host)
Windows 98SE	M.H. Stein	No issues detected with real Win98 PC
Windows XP Home Edition		No problems have been reported
WINE on Debian	John Hogerhuis	Works

Cabling Requirements

The cable from the PC must be a proper full-null cable which implements the hardware flow control (CTS/RTS) lines. TBACK will not work with a cable that is missing the flow control signals (3-wire cables) or which loops back flow control. The author uses a Belkin Serial Laplink cable.

TBACK is not designed to work with a T200, though a variant for the T200 is possible. Certainly variants are possible for the T200 and the Model 100 workalikes.

Experimental Release

TBACK is currently in an experimental stage, but it does work.

Download the zipped executable Here.

Usage

Download TBACK.ZIP, unzip somewhere on your drive where you can easily find it from the command prompt (perhaps c:\tback\ ).
Start a command prompt;
- Windows XP: Start -> Run -> cmd
- Windows 98: Start -> Run -> COMMAND
cd to the directory where you unzipped TBACK.EXE, i.e. cd c:\tback

Freeze

On the Model 100, enter BASIC and type:
```
RUN"COM:98N1E
```
Hit the ENTER key on your Model 100.
From the directory you unpacked TBACK.EXE on the PC type:
```
tback com1 MYBACKUP.CB
```
Hit the ENTER key on your PC.
Wait about 9 seconds and you should have a file BACKUP.CB in your directory.

Thaw

On the Model 100, enter BASIC and type:
```
RUN"COM:98N1E
```
Hit the ENTER key on your Model 100.
From the directory you unpacked TBACK.EXE on the PC type:
```
tback -r com1 MYBACKUP.CB
```
Hit the ENTER key on your PC.
Wait about 9 seconds and you the your Model 100 should be running the saved image.

Put

Use Put mode to install an arbitrary binary .CO file onto the laptop.

On your laptop:

RUN"COM:98N1E"

or run a program, say, S.BA that has

1RUN"COM:98N1E

Then on the PC, type

TBACK -p com1 MYPROG.CO

TBACK supports several options. Not all work in this experimental version. To investigate them, type:
tback --help and hit enter.

C:\projects\model_t\TBACK>tback --help
tback, Model 100/102 Memory Backup Utility
*EXPERIMENTAL* PROVIDED AS-IS WITH NO WARRANTY OF ANY KIND.
Copyright (C) 2009 DevWrights

Usage:

 tback -b|-r|-i [-n] [-q] comport [ <filename> | - ]
   --backup, -b		receive a backup from laptop
   --restore, -r	restore a backup to laptop
   --inject, -i		only inject the restore utility
   --quiet, -q		quiet mode (no prompts)
   --verbose, -v	print debug trace messages
   --fast, -f		use 76800bps speed nominal
   <filename>		filename to save image to
			defaults to BACKUP.CB
   -			write received image to STDOUT, not a file
   --help		this message

C:\projects\model_t\TBACK>

WINE

WINE implements the Win32 API under Linux. I was able to operate tback.exe under Linux without difficulty.

ex.:

sudo apt-get install wine wine-doc binfmt-support
wget http://bitchin100.com/files/m10x/tback.zip
unzip tback.zip
chmod +x tback.exe
./tback.exe com1

./tback.exe --help
tback, Model 100/102 Memory Backup Utility
*EXPERIMENTAL* PROVIDED AS-IS WITH NO WARRANTY OF ANY KIND.
Copyright (C) 2009 DevWrights

Usage:

 tback -b|-r|-i [-n] [-q] comport [ <filename> | - ]
   --backup, -b		receive a backup from laptop
   --restore, -r	restore a backup to laptop (TBI)
   --inject, -i		only inject the restore utility
   --quiet, -q		quiet mode (no prompts)
   --verbose, -v	print debug trace messages
   <filename>		filename to save image to
			defaults to BACKUP.CB
   -			write received image to STDOUT, not a file
   --help		this message

john@office:~/Desktop$

Applications

Clone your laptop state wholesale and pop it open in VirtualT
Offload RAM state after a cold start
Quick backups

To-do

Add a diagnostic mode to check the cabling and ensure it's up to snuff for TBACK usage.

Future Improvements

(done) Add a "recover" feature to load the saved image back onto M10x
Offer "quick mode" where unused RAM (free space) is not transferred to the PC
Add a extraction feature that can extract any files (DO, BA, CO, ...) in the captured data as files on the PC file system.
Although a proper serial port and cable is highly reliable, it would be nice to have a checksum feature.
Support dumping the Main ROM or Option ROM
Support dumping the contents of a REX chip
Support backing up Remem
Support for T200 for main rom(s), option roms and all 3 banks of ram!

Design Notes

The background concepts for this utility are described in this article.

TBACK

Contents