5MHz Upgrade hacks
Can we speed up the Model T? Apparently!
I have been investigating various ways to make the Model T run … faster.
Currently I have fixed 5MHz upgrade solutions for
M100 T102 M100 running NSC800 CPU
I also have a switchable 5MHz solution now for
Switchable means that you can control the speed from BASIC.
As I test and more-or-less land on a reasonable upgrade process, I will post instruction files here If you have any questions, please get in touch with me at Twospruces at --the google mail service.
What are the tradeoffs?
When installed, your laptop will be running at 2x clock speed. However, the system clock remains unchanged.
1. Processor, memory, LCD, I/O. BCR are all running at 5MHz 2. The serial port, modem and printer ports are unchanged 3. Cassette port will not work correctly. It will be 2x faster. (makes the case for a switchable solution). 4. 5MHz draws more current, (2.5M = about 60mA, 5M = about 100mA), so shorter battery life. (but you are working faster!)
The switchable solution is a nice way to go. Switch up when needed, switch down when necessary.
What about compatibility with REX#/REXCPM?
REX# and REXCPM from November 2021 are built and tested compatible with 5MHz. In fact my test station runs at 5MHz. If you have an earlier REX#/REXCPM, contact me to discuss what to do.
What do you need?
Some hardware skills - soldering, PCB modification etc. a clock divider circuit board a small number of parts (depending on the solution) a 9.803 HC49 crystal
Take a look at the instruction files below. Please don't try this if you are not confident of success! I welcome feedback and comments. Especially if you find errors or improvements.
M100: I have a solution but it isn't simple enough yet. I have a small PCB coming that I hope will simplify the hack. M100 is more involved because the 8kB RAM module (stock) is too slow, and they cannot be sped up. In addition, the main ROM is super-slow, and simply cannot run at 5MHz. So, you need to replace the main ROM with a 27C256 + adapter board. The new PCB that is coming, is a special main ROM adapter board that also includes an SRAM to replace the slow stock SRAMs.
So, a bit more involved.
|Computer model||Version||Upgrade file|
|T102||Fixed 2x upgrade V1||T102 5MHz mod V1 Nov 2021.pdf|
|T102||Fixed 2x upgrade V1.1||T102 5MHz mod V1.1 Nov 2021.pdf|
As this is tried I'm sure questions and comments will arise. We can capture useful information here. Thanks.
coming soon - M100 fixed upgrade, software switchable solutions