Model 100 Serial Interface: Difference between revisions
From Bitchin100 DocGarden
Jump to navigationJump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
== Overview == | |||
The BASIC ROM provides access to the serial port. This support is well documented elsewhere. This article covers direct use of the IM6402 UART. | |||
== Configuration == | == Configuration == | ||
Revision as of 16:18, 1 February 2009
Overview
The BASIC ROM provides access to the serial port. This support is well documented elsewhere. This article covers direct use of the IM6402 UART.
Configuration
Serial Word Format
Port $D8 controls the serial word format.
Bit
Function
Note
0
Stop bits
0 → 1 stop bit
1 → 2 or 1.5 stop bits (1.5 if character length is 5, 2 otherwise)
1
Parity
0 → Odd parity
1 → Even
2
Parity Inhibit
0 → Parity
1 → No parity
4-3
Character length
Number of bits:
00 → 5
01 → 6
10 → 7
11 → 8
7-5
Unused
Baud Rate
Data Transmission
Data Reception
I/O Map
Name Direction Port TX Output $C8 RX Input $C8 RTS Output $BA, bit 7 CTS Input $BB, bit 4 DSR Input $BB, bit 5 DTR Output $BA, bit 6
Direction indicates both data flow, and whether to use an IN or OUT instruction to read/write to the given pin.
