Recovering an Unresponsive Laptop: Difference between revisions

From Bitchin100 DocGarden
Jump to navigationJump to search
 
Line 19: Line 19:
# Leave the laptop plugged in to the wallcube overnight with Memory Power switch on, and the power off. I don't think it matters whether you use good AA's or the wallcube at this point.
# Leave the laptop plugged in to the wallcube overnight with Memory Power switch on, and the power off. I don't think it matters whether you use good AA's or the wallcube at this point.
# Let the unit sit with the Memory Power button off and no plug or other cables connected or batteries in the battery compartment for about 15 minutes in order to clear the RAM.
# Let the unit sit with the Memory Power button off and no plug or other cables connected or batteries in the battery compartment for about 15 minutes in order to clear the RAM.
# Turn the memory power switch back on
# Turn the memory power switch back on, reinstall the AA batteries and/or connect the power cable
# With the power-button ON, hold down Ctrl-shift-break simultaneously, and hit reset button to clear the RAM
# With the power-button ON, hold down Ctrl-shift-break simultaneously, and hit reset button to clear the RAM



Latest revision as of 14:48, 25 September 2013

Every once in a while, someone comes to the TRS-80 Model 100 mailing list asking how to recover a laptop they bought off ebay that is unresponsive to the power button.

Clear the RAM File System

Although the Model T laptops use standard AA batteries, understand that there is an internal battery soldered to the motherboard that maintains power to the RAM even when the main batteries are dead or removed.

Often with units that have sat unused for awhile these problems occur:

  • the nicad is drained
  • the RAM is in some random state
  • the contrast knob is in some random state

You need to resolve all three, but you need to do it in the right order. Almost always you can recover a Model T without resorting to more serious troubleshooting.

  1. Leave the laptop plugged in to the wallcube overnight with Memory Power switch on, and the power off. I don't think it matters whether you use good AA's or the wallcube at this point.
  2. Let the unit sit with the Memory Power button off and no plug or other cables connected or batteries in the battery compartment for about 15 minutes in order to clear the RAM.
  3. Turn the memory power switch back on, reinstall the AA batteries and/or connect the power cable
  4. With the power-button ON, hold down Ctrl-shift-break simultaneously, and hit reset button to clear the RAM

Now fiddle with the contrast knob. Hopefully you will see the normal Model 100 main menu.

Check the Display

In rarer cases, the problem is a bad display, or problematic (internal) display connection. If the "clear RAM" steps above do not resolve the issues, the display is the next thing to check.

To diagnose this problem,

  1. Perform cold-boot (CTRL-BREAK-Reset)
  2. Hit the Enter key
  3. Type "beep" (without quotes) and hit Enter again

The machine will make a beep sound if it is actually working (meaning it has a bad LCD or bad LCD connection). Your recourse at this stage is to find a replacement display. Club100 or another community member may be able to help you.

If it doesn't work you could have multiple problems, including a bad display, bad keyboard, or a problem with the mainboard.

Otherwise

If none of the steps above lead you to a resolution, then more serious troubleshooting begins. Head over to the Model 100 mailing list (you can subscribe at Model 100 Mailing List )