Using TS-DOS to Load RAM4TH: Difference between revisions
From Bitchin100 DocGarden
Jump to navigationJump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
[[image:RLCLDR.DO|RLCLDR.DO | * First, download | ||
** [[image:RAM4TH.DO]] | |||
** [[image:RLCLDR.DO|RLCLDR]] | |||
Note: clicking on each link brings up a page. There is a link with the expected file name near the top that you can right click, and save the link target). | |||
* Transfer these to your external drive in the usual way. | |||
* Connect the drive to your Model T laptop. | |||
* Enter TS-DOS. Ensure that "DOS-ON" is enabled. | |||
* Exit TS-DOS. | |||
* Enter BASIC. | |||
* Type<pre> | |||
load"0:RLCLDR.DO" | |||
save"0:RLCLDR.BA" | |||
new | |||
clear 100,50176 | |||
run"0:RLCLDR.BA" | |||
</pre> | |||
* Select option #1 | |||
* Enter the following output filename:<pre> | |||
0:RAM4TH.CO | |||
</pre> | |||
* Enter the following input filename:<pre> | |||
0:RAM4TH.DO | |||
</pre> | |||
* Indicate to load the program at address<pre> | |||
50176 | |||
</pre> | |||
* WAIT A LONG TIME. A REALLY LONG TIME. | |||
* At the BEEP, you should have a RAM4TH.CO image on your external drive. | |||
* To load RAM4TH type:<pre> | |||
CLEAR0,50176 | |||
RUNM"RAM4TH.CO" | |||
</pre> | |||
* To exit RAM4TH type:<pre> | |||
MENU | |||
</pre> | |||
Revision as of 22:06, 17 December 2008
- First, download
Note: clicking on each link brings up a page. There is a link with the expected file name near the top that you can right click, and save the link target).
- Transfer these to your external drive in the usual way.
- Connect the drive to your Model T laptop.
- Enter TS-DOS. Ensure that "DOS-ON" is enabled.
- Exit TS-DOS.
- Enter BASIC.
- Type
load"0:RLCLDR.DO" save"0:RLCLDR.BA" new clear 100,50176 run"0:RLCLDR.BA"
- Select option #1
- Enter the following output filename:
0:RAM4TH.CO
- Enter the following input filename:
0:RAM4TH.DO
- Indicate to load the program at address
50176
- WAIT A LONG TIME. A REALLY LONG TIME.
- At the BEEP, you should have a RAM4TH.CO image on your external drive.
- To load RAM4TH type:
CLEAR0,50176 RUNM"RAM4TH.CO"
- To exit RAM4TH type:
MENU
