Using TS-DOS to Load RAM4TH: Difference between revisions

From Bitchin100 DocGarden
Jump to navigationJump to search
No edit summary
No edit summary
Line 1: Line 1:
* First, download
* First, download
** [[image:RAM4TH.DO]]
** [[image:RAM4TH.DO]]
** [[image:RLCLDR.DO|RLCLDR]]
** [[image:RLCLDR.DO|RLCLDR]]

Revision as of 22:07, 17 December 2008

Note: clicking on each link brings up a page. There is a link with the expected file name near the top that you can right click, and save the link target).

  • Transfer these to your external drive in the usual way.
  • Connect the drive to your Model T laptop.
  • Enter TS-DOS. Ensure that "DOS-ON" is enabled.
  • Exit TS-DOS.
  • Enter BASIC.
  • Type
load"0:RLCLDR.DO"
save"0:RLCLDR.BA"
new
clear 100,50176
run"0:RLCLDR.BA"
  • Select option #1
  • Enter the following output filename:
0:RAM4TH.CO
  • Enter the following input filename:
0:RAM4TH.DO
  • Indicate to load the program at address
50176
  • WAIT A LONG TIME. A REALLY LONG TIME.
  • At the BEEP, you should have a RAM4TH.CO image on your external drive.
  • To load RAM4TH type:
CLEAR0,50176
RUNM"RAM4TH.CO"
  • To exit RAM4TH type:
MENU
Retrieved from "https://bitchin100.com/wiki/index.php?title=Using_TS-DOS_to_Load_RAM4TH&oldid=605"