Search results

serial port, I highly recommend a cable I just picked up from I've always been impressed with Belkin serial cables and this is

*Working USB to serial adapter or Mac with serial port *The name of the OS X serial port driver (either the adapter or built in)

== Mac Serial Ports == ...rial adapter for a serial port. There's nothing special about USB -> RS232 serial ports vs. the usual

The Model T can be used as a serial terminal to a Linux machine. [http://zork.net/~octal/mod100.xhtml The Model 100 Serial Terminal Project]

Connection to MITS will normally occur via a serial->Internet bridge device. The Serial->Internet bridge is out of scope for MITS. Possibilities include

also need a USB to Serial adapter; plug it in and install 3 - If your PC has a COM port, check your BIOS or configuration

The BASIC ROM provides access to the serial port. BASIC ROM support is well documented elsewhere. This article covers direct Before the serial port can be used, it must be configured both for serial word format (data bits, stop bits, and parity) and baud rate.

The BASIC ROM provides access to the serial port. BASIC ROM support is well documented elsewhere. This article covers direct Before the serial port can be used, it must be configured both for serial word format (data bits, stop bits, and parity) and baud rate.

the Win32 API for access to the serial port. So it is completely portable to any Microsoft operating serial port API in .NET. If you need a TPDD emulator for a POSIX system, you should be

"Serial Port" (0x1101)

...do not come with a serial port, some of us have had to make do with USB-->Serial adaptors to get Laddiecon or Desklink to work with our m100s. Currently, th 5. Now the fun part. Get your USB-> Serial cable out and ready, but do not plug it in yet. Type 'lsusb' (minus the quo

...h one of two power options - either directly powered from the M100 via BCR port, ...2, here is the instruction manual. Keep in mind REX ships with the serial port pre-set to 19200 8N1.

...on the Model 100 today is limited to (1) the RS-232 port and (2) the modem port, both of which use the single UART in the computer. ...the BCR port to send and receive half duplex serial TTL signals. The BCR port is already set up for TTL receive function as this is used for the Bar Code

...ou MUST have a way of hosting files REX can access over the serial (RS232) port.

...CTTY command. CTTY can redirect I/O to the serial output, for use with any serial terminal, like a Model T. So, issue the command CTTY COM1: on the PC, and s * a DOS-running PC with a serial port. Ideally, any old one between a '386 an a Pentium II. Faster PCs could caus

<tr><td>MVT100 KIT</td><td>M100, T102</td><td>serial video adapter!</td><td>45$</td><td>eta August</td><td> [[VT100|MVT100 infor <tr><td>MVT100 Assembled/tested</td><td>M100, T102</td><td>serial video adapter!</td><td>70$</td><td>eta August</td><td> [[VT100|MVT100 infor

port on your Model T. That means your adapter should be 25-pin male to Click the "ON" button. This turns on the serial port power on your Palm.

The TPDD connects to the Model T via the serial (RS232) port.

They allow you to establish a TCP connection to a PC from your Model T serial port. This means, listen on all IP addresses at port 8085.