8kB SRAM module

From Bitchin100 DocGarden
Jump to: navigation, search

Add 8kB to your M100/NEC/M10/KC-85

  This module plugs into the memory expansion sockets on these 
  similar Model T computers.
  It plugs right in! 


8kram.jpg


Installation

  1.  Gain access to the memory expansion socket(s).  How depends on the laptop.
      You may need to open the case, or just open the memory access compartment.
  2.  Align and orient the SRAM card over the socket ensuring to match
      the correct orientation. 
  3.  Carefully press the SRAM card until it is fully seated in the sockets.
      Be careful not to bend the pins!
  6.  Close up the laptop or replace the cover, turn on and run a memory test to confirm the installation is good!